Frame: Seat back and arms are engineered hardwood, Components are glued and nailed, Reinforcing corner blocks are glued and stapled
Suspensions: Seat suspension built with heavy-duty, 8 gauge sinuous wire springs running front-to-back and secured to the frame at either end. Two tie wires stretch left-to-right behind springs and are metal-fastened to each spring, creating a single, cohesively strong seat suspension system.
The back is 100% Sytex sheet webbing, The Seat suspension is fibre-covered to prevent metal springs from contacting foam
Functions: 350 LB. Capacity, Three - position, push arm reclining mechanism, Three-position, push arm reclining mechanism
Full-length footrest provides support for the entire leg
Four wood legs
Many options available including 3" non-marking twin wheel casters to
replace four wood legs, must be factory installed
Foam: CFC-free, Bio-FlexTM Hybrid includes soy-based foam, Seat: Molded Contoured Cut Foam
Back: Molded Contoured Cut Foam Footrest (Part 1= .5" thick & Part 2 = .5" thick) Arms (Part 1= .75" thick & Part 2= .5" thick) CAL 117 rated (CFR)
2.5 Density 55 UC
1.4 Density 27 CFR
1.5 Density, 45 CFR 1.5 Density, 45 CFR
Upholstery: Standard fabrics Cal 117 rated and tested for high wear (most more than 30,000 double rubs Wyzenbeek Wire Mesh test).
Woven Cryptons treated with Perma Block or vinyls with Blockade/Nanocide which are antibacterial, anti-microbial and mildew-resistant
See individual swatches for technical specifications, Teflon/Scotchguard information, etc.
It also accepts leather, faux leather and vinyl upholsteries
Dimensions: Overall: 29''W x 37.5"D (70" Reclined) x 46.75"H
Seat: 20.75"W x 20"D x 20"H"
Back: 20.5"W x 31"H
Arm Height from Seat: 9"